What is the length of a precut 9' stud?

What is the rough opening for a 4 0 X 4 0 window?

What is the height of a trimmer?

How close to a joint must there be a anchor bolt?

What is the nailing pattern for plywood? _________ seam __________field

The total width of a header includes the door, plus two inches, plus two trimmers. T F

The total width of a sill is the window size plus one half inch. T F

Windows must have a rough opening framed __________inch larger than the window.

Doors must have a rough opening framed _________inches larger than the door.

Platform framing is also called western framing. T F

In balloon framing , studs extend from the sill to the double plate. T F

It is important to space plywood sheets on each end.

Why do we install the headers on the exterior side of the studs?

Is it safe to burn treated lumber?

Circle the type of wood that can be used for weight bearing walls.

Doug Fir

White Fir

Pine

It is okay to stand on the top step of a step ladder. T F

How high should a ladder extend above a roof line?

When using an extension ladder up to a roof, it is important to install it with a 4 to 1 ratio T F

It is okay to use a ladder if only two rungs are bent. T F

How much of a gap do you need between the ends of four by eight foot sheets?

If a tough shed is 24 feet by 10 feet by 8 feet tall,

How many lineal feet of plate material will you need? ______________________

How much offset must the joints in the top plate and the double plate be? _____

How many sheets of plywood will you need for the floor?__________________

How many sheets of plywood will you need for the walls? _______________ How many lineal feet of joists will you need. in 10' lengths?_________________

If there are 47 16d nails in every pound, how many pounds of 16d nails will you need for this project? ___________ NOTE: each stud will need nine nails, and each joist four nails, then add an additional 10% for bending.

## No comments:

## Post a Comment